C H A M P A K
  • Time : Monday-Friday 09am-6pm
  • Ceritified ( ISO 9001:2008 )

Our Product Range

the leading stockiest, importers, exporters & suppliers of Ship Building Plates Lloyds A

Ship Building Plates Lloyds A


Champak Industries is a large stock of shipbuilding steel plate. This is normally used for shipbuilding and offshore use. We keen on supporting customers' requirements of thicker and higher quality plates especially when through thickness testing is important.

Mainly our steel plates for shipbuilding are approved by either Lloyds Register of Shipping (LRS) or Det Norske Veritas (DNV).

We can also support customers who require shipbuilding plates to ABS though this comes as an additional report to the MTC

Shipbuilding Steel Plate Ex-Stock

• EH36 and DH36 and AH36 High strength shipbuilding steels and Grade A normal strength plates available
• Mill is Dillinger Hutte so steel produced in Germany and rolled in either Germany or France (G7 Origin).
• MTC's to EN10204 3.2
• Thickness 5 – 150 mm
• Widths – 1500, 2000, 2055, 2500 and 3000 metres
• Lengths: 6m, 12m and 14m

We focus on high performance EH36 and DH36 plates with the thickest plates being to Lloyds Register. Typically for most customers we are able to supply a significant number of 100mm plus plates from our stock and this can be collected almost immediately (subject to PO approval and plate movements inside the warehouse)

Who buys shipbuilding steel plate from us?

We mainly deliver heavy engineering groups serving the oil and fuel and offshore sectors in Asia. They commonly require thick plates of excessive pleasant. There are regularly very rigorous necessities round both minimal yield strength and the chemical composition.

We're famous with both nearby stockholders and engineering groups each due to the fact we've got excessive quality AH36, DH36 and EH36 plates in inventory, and because the choice of plates that we have available permits engineers to select plates that meet their requirements in preference to having to are searching for derogations or non-compliances.

Thick Steel plates for shipbuilding

Like maximum of our metal stockholding our shipbuilding plates are typically thick and heavy. While we do have great stocks of 6mm – 40mm plates we are specific in our so much of our inventory is above 50mm thick, and mainly how a whole lot is above 100 mm thick.

Many stockholders don't deliver heavy plates, forcing customers to buy from the mill and receive longer lead times. We stock thick plates for several motives. The important thing one is that we have confidence inside the technical first-class of the metal plate.

Dillinger is the oldest heavy plate mill in the global and has a large quantity of enjoy in producing thick plates where the yield strength is maintained to lots big quantity as the plate gets thicker, at the same time as additionally avoiding the troubles with negative micro-shape and tearing and laminations that can affect different metal producers and rollers.

That is of essential importance to many shipbuilders. Believe discovering that considered one of your key base plates has a lamellar tear in it – and you want to cast off greater than one thousand MT from your new construct shape a good way to get right of entry to and replace the plate. The best of Dillinger plate reduces that threat.

Fine Steel Plates For Shipbuilding

You may usually purchase cheaper metal. Apparently you could even buy steel plates with a fake MTC. If that is what you want then that's a unique marketplace to the only we aid.

Whether you need 10 mm or 100 mm thick metal plate there are some key questions that you have to answer. Does the metal meet the specification? Does the metal deliver sufficient margin for my design. The steels that we stock for shipbuilding are all designed to reap the specification that they are able to regularly be used at a better grade. For example our dh36 plates are generally examined to -40 on a in step with warmness foundation. that means that while they don't have the assured values that eh36 has – there are lots of dh36 plates in inventory that meet the necessities for eh36.

That level of satisfactory way that your production manner is accelerated. Procurement is less complicated due to the fact its miles clean that the plates meet the necessities. Internalqa becomes trustworthy with far fewer troubles of plate great to devour time, and final approval by the purchaser gives them confidence. Faster, simpler, easier production of the layout.

And of route with higher exceptional the disorder and rejection charge is decreased. Those shipbuilding metal grades are usually to be had ex-stock. Thethickness is for indication most effective however we are able to normally have thicker plates to be had in most grades

Standard Grade Minimum Thickness (mm) Maximum Thickness (mm)
Lloyds Register Grade A 5 150
Lloyds Register AH36 5 150
Lloyds Register DH36 5 150
Lloyds Register EH36 5 150
WANT TO KNOW MORE?
or call
0982 0944 724