• Time : Monday-Friday 09am-6pm
  • Ceritified ( ISO 9001:2008 )

Our Product Range

the leading stockiest, importers, exporters & suppliers of JFE 780 LE Plates

JFE 780 LE Plates


High Strength JFE 780 LE Plates is low-alloyed high-strength steel plate manufactured by TMCP, or quenched and tempered. Because Champak offers high strength, it results in a significant reduction in the weight of welded structures. Good WeldabilityJFE 780 LE Plates of which chemical composition is controlled by specific procedure offers low carbon equivalent and excellent weldability.

Champak Industries also supplies welding materials suitable for JFE-HITEN effectively, and thereby enjoys acceptances by customers. Excellent Notch Toughness JFE 780 LE Plates offers high notch toughness because it is produced by closely controlling the chemical composition and heat treatment conditions. Application of Champak Industries ensures construction of structures providing high reliability against brittle fracture. Excellent Uniformity and Clean Surface Rolled on the most modern plate mill under rigid quality control, JFE 780 LE Plates has excellent uniformity in properties, flatness and surface finish. In addition, slab surfaces are carefully scarfed, powerful water jets are used during rolling, and nonoxidizing atmosphere furnaces are used for heat treatment. Consequently, JFE 780 LE Plates has smooth and clean surfaces. Good Workability Because JFE 780 LE Plates features good ductility, it offers not only good formability, but also good machinability, making it easy to drill and cut. Wide Range of Sizes JFE Plates are available in widths of up to 5,350mm, and in lengths of up to 27,000mm, and then contributes to saving expenses.

JFE'S HIGH TENSILE STRENGTH STEEL PLATE PRODUCTS SPECIFIED BY TYPICAL STANDARDS

Type of Steel JIS ASTM EN WES ** Ship's class
Standard ***
JFE Standard
Steel
Plates
for
Structural Use
590N/mm2 Class G 3106 SM570* A678 Gr.0
Gr.D
A841
  HW 450
HW 450CF
A47
D47
E47
F47
JFE-HITEN570U2
JFE-HITEN570E
JFE-HITEN590S
JFE-HITEN590SL
JFE-HITEN590AZ
JFE-HITEN590
JFE-HITEN590U2
JFE-HITEN590E
      HW 490
HW 490CF
A51
D51
E51
F51
JFE-HITEN610
JFE-HITEN610U2
JFE-HITEN610E
690N/mm2 Class       HW 550
HW 620
A56
D56
E56
A63, 63N
D63, 63N
E63
JFE-HITEN690S
JFE-HITEN690
JFE-HITEN690M
JFE-HITEN710
JFE-HITEN710M
780N/mm2 Class G 3128
SHY685
SHY685N
SHY685NS
A514
A709 Gr.100
  HW 685 A70, 70N
D70, 70N
E70, 70N
F70, 70N
JFE-HITEN780EX
JFE-HITEN780S
JFE-HITEN780LE
JFE-HITEN780M
980N/mm2 Class       HW 885   JFE-HITEN980S
JFE-HITEN980
Steel
Plates for Pressure Vessels
590N/mm2 Class G 3115 SPV450
G 3124 SEV345
A537 Cl. 2
A738 Gr.B
A841
EN10028
P460N
HW 450 KPV46 JFE-HITEN570U2
JFE-HITEN570E
JFE-HITEN590
JFE-HITEN590U2
JFE-HITEN590E
G 3115 SPV490     HW 490 KPV50 JFE-HITEN610
JFE-HITEN610U2
JFE-HITEN610E
690N/mm2 Class   A543 Cl. 1   HW 620   JFE-HITEN690M
780N/mm2 Class   A517
A543 Cl. 2
  HW 685   JFE-HITEN780M
980N/mm2 Class       HW 885   JFE-HITEN980

GRADES OF JFE-HITEN

Strength
(N/mm2)
Designation Thickness
(mm)
Yield Strength Min.
(N/mm2)
Tensile Strength
(N/mm2)
Features and Typical Applications
590 JFE-HITEN590
JFE-HITEN610
JFE-HITEN570U2
JFE-HITEN590U2
JFE-HITEN610U2
JFE-HITEN570E
JFE-HITEN590E
JFE-HITEN610E
6 – 150
6 – 150
6 – 100
6 – 75
6 – 75
6 – 100
6 – 75
6 – 75
450
490
450
450
490
450
450
490
590 – 710
610 – 730
570 – 700
590 – 710
610 – 730
570 – 700
590 – 710
610 – 730
For Bridges, Penstocks, Tanks, Offshore
structures
U2 : High Tensile Strength Steel Plates
with High Weldability
E : High Tensile Strength Steel Plates
with High Weldability
for High Heat Input Welding
JFE-HITEN590S
JFE-HITEN590SL
6 – 40
6 – 50
450
450
590 – 710
590 – 710
S : Without Heat treatment for Civil
Engineering and Industrial Machinery
SL : Same as above with excellent
toughness at low temperature (-40°C)
690 JFE-HITEN690
JFE-HITEN710
6 – 100
6 – 100
590
620
690 – 820
710 – 840
Ni-free type
for Tanks, Offshore Structures etc.
JFE-HITEN690M
JFE-HITEN710M
6 – 100
6 – 100
590
620
690 – 820
710 – 840
Ni type and Low carbon-equivalent
for Bridges, Penstocks, Tanks, etc.
JFE-HITEN690S 6 – 25 550 690 – 830 With reducing alloying elements and
without Heat Treatment, for Civil
Engineering and Industrial Machinery
780 JFE-HITEN780M 6 – 150 685 780 – 930 Ni type and Low Carbon-equivalent for
Bridges, Penstocks, Offshore structures etc.
JFE-HITEN780EX 6 – 60 685 780 – 930 High Performance with Relaxing
Pre-heating for Bridges
JFE-HITEN780S 5 – 160 685 780 – 930 Reducing alloying elements for Civil Engineering
and Industrial Machinery
JFE-HITEN780LE 5 – 160
160.1 – 203.2
685
610
780 – 930
700 – 850
High Weldability and excellent toughness at low
temperature (-40°C), for Civil
Engineering and Industrial Machinery
980 JFE-HITEN980 6 – 120 885 950 – 1130 High Strength, High Weldability and Good
Toughness for Penstocks
JFE-HITEN980S 5 – 50.8 885 950 – 1130 For Civil Engineering and Industrial Machinery
JFE-HITEN980LE 5 – 50.8 900 980 – 1150 High tensile strength steel plate with excellent low
temperature toughness (-40°C) for Civil Machinery
and Industrial Machinery.
JFE–HYD960LE 5 – 50.8
50.9 – 63.5
960
930
980 – 1150
950 – 1120
Higher yield strength than conventional 980 grade steel,
high weldability and excellent toughness at low temperature
(-40°C), for Civil Engineering and Industrial Machinery.
1180 JFE–HYD1100LE 12 – 32 1100 1180 – 1500 High tensile strength steel plate for Civil Machinery and
Industrial Machinery. Has high yield stress, and excellent
weldability and low temperature toughness (-40°C).

AVAILABLE SIZES

Without Heat Treatment
Width mm_
Thickness
mm
1000
_
1400
1401
_
1600
1601
_
1800
1801
_
2000
2001
_
2200
2201
_
2400
2401
_
2600
2601
_
2800
2801
_
3000
3001
_
3200
3201
_
3400
3401
_
3600
3601
_
3800
3801
_
4000
4001
_
4200
4201
_
4400
4401
_
4600
4601
_
4800
4801
_
5000
5001
_
5200
5201
_
5300
5301
_
5350
6.0 - 6.9 25 22 22 19 16 13.5 13.5
7.0 - 9.0   22 20 16 13.5 13.5
9.1 - 11.9   20 20 20 16
12.0 - 13.9 27         25 22 16
14.0 - 25.0     16
25.1 - 28.0 25   16
28.1 - 32.0 25   24 23 20 16
32.1 - 38.0 25 24 23 22 21 20 19 18 16
38.1 - 45.0     25     24 23 23 20 19 19 18 17 16 16 16
45.1 - 50.0 23 22 21 20 20 18 17 16 16 15 14 14 14
50.1 - 55.0 24 24 21 21 20 19 18 18 16 16 15 14 14 13 13 13
55.1 - 60.0 24 22 21 19 19 17 16 16 15 14 13 13 12 12 12 11
60.1 - 65.0 24 23 21 20 18 18 17 16 15 15 14 13 12 12 11 11 10 9.5
65.1 - 70.0 24 24 22 21 19 18 17 16 15 14 14 13 12 12 11 11 10 10 9.5
70.1 - 75.0 24 23 24 23 21 20 18 17 15 15 15 14 13 13 12 11 11 10 10 9.2 9 8.5
75.1 - 80.0 23 23 22 21 21 19 18 17 15 14 14 13 12 12 11 11 10 10 9.6 9.2 9 8.5
80.1 - 90.0 20 20 20 19 19 17 16 15 14 13 12 11 11 10 10 9.7 9.2 8.8 8.5 8.2 8 7.5
90.1 - 100.0 18 18 18 17 17 15 14 13 12 11 11 10 10 9.6 9.1 8.7 8.3 8 7.6 7.3  
100.1 - 110.0 16 16 16 16 15 14 13 12 11 10 10 9.7 9.1 9 8.3 8 7.6 7.2 7 6.7
5.8
110.1 - 120.0 15 15 15 14 14 13 12 11 10 10 9.4 8.8 8.4 8 7.6 7.2 6.9
6.0
6.6
5.8
6 6
120.1 - 130.0 14 14 14 13 13 12 11 10 9.8 9.2 8.6 8.2 7.7 7.3 7.0 6.7
5.8
6 6 5.1 5.3
130.1 - 140.0 13 13 13 12 12 11 10 9.7 9 8.5 8 7.5 7.1 7 6 6 5.1 5.1 5.1 5.3
140.1 - 150.0 12 12 12 11 11 10 9.7 9.1 8.4 7.9 7.4 7 6.7
5.8
6 6 5 5 5  


Heat Treated
Width mm_
Thickness mm
1000
_
1600
1601
_
1800
1801
_
2000
2001
_
2200
2201
_
2400
2401
_
2600
2601
_
2800
2801
_
3000
3001
_
3200
3201
_
3400
3401
_
3600
3601
_
3800
3801
_
4000
4001
_
4200
4201
_
4400
4401
_
4600
4601
_
4800
4801
_
5000
5001
_
5200
5201
_
5300
5301
_
5350
6.0 - 6.9       22 20 15 13        
7.0 - 7.9 25 24 22 20 15
8.0 - 8.9     22 18 16 13 11
9.0 - 9.9     22 20 16 12
10.0 - 11.9   22 20 18 Negotiable Range
12.0 - 13.9   22
14.0 - 26.0  
26.1 - 28.0
28.1 - 30.0 24 24 22
30.1 - 35.0 24 24 23 22 21 21 20
35.1 - 40.0 24 23 22 21 20 19 18 18 17
40.1 - 45.0 23 22 20 19 19 18 17 16 16 15
45.1 - 50.0 23 22 20
17
19 18 17 17 16 15 15 14 14
11
50.1 - 60.0 24 24 22 20 19 18 16 15 14 14 13 13 12 11
60.1 - 70.0   23 20 24 22 20 19 17 16 15 14 14 13 12 12 11 11 10 10 10
70.1 - 80.0 22 20 18 21 19 18 16 15 14 13 13 12 11 11 10 10 9.7 9.3 8.9 8.7
80.1 - 90.0 20 18 16 19 17 16 14 13 13 12 11 10 10 9.8 9.4 8.9 8.5 8.3 7.9  
90.1 - 100.0 18 16 14 17 15 14 13 12 11 10 10 9.8 9.3 8.8 8.4 8.0 7.7 7.3 7.0
67
5.5
100.1 - 110.0 16 14 13 15 14 13 12 11 10 9.9 9.4 8.8 8.4 8.0 7.6 7.3 6, y
6.0
6.6
5.7
110.1 - 120.0 15 13 12 14 13 11 11 10 9.7 9.1 8.5 8.1 7.7 7.3 6.9
6.0
6.6
5.7
6.3
5.8
5.2
120.1 - 130.0 13 12 11 13 11 11 10 9.5 8.9 8.3 7.9 7.3 7.0 6.7 6.4
5.5
5.2 5.0  
130.1 - 140.0 11 10 9.7 11 10 9.7 9.4 8.7 8.2 7.7 7.2 6.8 6.5
5.6
5.3 4.8  
140.1 - 150.0 10 10 9.6 10 9.7 9.4 8.7 8.1 7.6 7.1 6.7 6.4
5.5
5.2 4.9  


JFE-HITEN STANDARDS

JFE-HITEN590 Series and JFE-HITEN690 Series
Designation
(Thickness mm)
Heat
Treatment
Chemical Composition (%)   Tensile Test*1) Bending Test (180° ).2) Charpy Impact Test (2mmV) *3)
C Si Mn P S Cu Ni Cr Mo V Nb B Ceq   PCM Yield Strength (N/mm2) Tensile
Strength
(N/mm2)
  Elongation
(%)
  Bending Radius (Test Specimen No.1) Test Temperature (℃) Absorbed Energy (J)
Thickness
(mm)
Thickness
(mm)
Thickness
(mm)
Test
Specimen
Thickness
(mm)
Thickness (mm)
JFE-HITEN590
(6 - 150)
QT ≤ 0.16 0.15/0.55 ≤ 1.50 ≤ 0.025 ≤ 0.015 ≤ 0.30 ≤ 1.00 ≤ 0.30 ≤ 0.30 ≤ 0.08 - - t ≤ 50
50< t ≤ 75
75< t
≤ 0.44
≤ 0.46
≤ 0.48
≤ 0.26
≤ 0.28
≤ 0.28
- ≥ 450 590/710 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
- 1.5t 12 - 10 ≥ 47
JFE-HITEN610
(6 - 150)
QT ≤ 0.16 0.15/0.55 ≤ 1.50 ≤ 0.025 ≤ 0.015 ≤ 0.30 ≤ 1.00 ≤ 0.30 ≤ 0.30 ≤ 0.08 - - t ≤ 50
50< t ≤ 75
75< t
≤ 0.45
≤ 0.47
≤ 0.49
≤ 0.26
≤ 0.28
≤ 0.28
t ≤ 75
75< t
≥ 490
≥ 470
610/730 t ≤ 16
16< t ≤ 50
20< t
≥ 19
≥ 27
≥ 19
No.5
No.5
No.4
-; 1.5t 12 32 - 10
- 15
≥ 47
≥ 47
JFE-HITEN690
(6 - 100)
QT ≤ 0.16 ≤ 0.35 ≤ 1.20 ≤ 0.025 ≤ 0.015 ≤ 0.40 ≤ 1.00 ≤ 0.70 ≤ 0.50 ≤ 0.08 - ≤ 0.005 t ≤ 50
50< t
≤ 0.54
≤ 0.58
-
-
t ≤ 75 75< t ≥ 590
≥ 570
690/820 t ≤ 16
16< t ≤ 50
20< t
≥ 17
≥ 25
≥ 17
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
12 32 50 - 15
- 20
- 30
≥ 47
≥ 47
≥ 47
JFE-HITEN710
(6 - 100)
QT ≤ 0.16 ≤ 0.35 ≤ 1.20 ≤ 0.025 ≤ 0.015 ≤ 0.40 ≤ 1.00 ≤ 0.70 ≤ 0.50 ≤ 0.08 - ≤ 0.005 t ≤ 50
50< t
≤ 0.55
≤ 0.59
-
-
t ≤ 75
75< t
≥ 620
≥ 600
710/840 t ≤ 16
16< t ≤ 50
20< t
≥ 17
≥ 25
≥ 17
No.5
No.5
No.4
t ≤ 32
32< t
1.5t .
20t
12 32 50 -15
- 20
- 30
≥ 47
≥ 47
≥ 47
JFE-HITEN690M
(6 - 100)
OT ≤ 0.14 ≤ 0.35 ≤ 1.20 ≤ 0.015 ≤ 0.015 ≤ 0.40 0.30/1.30 ≤ 0.70 ≤ 0.50 ≤ 0.05 - ≤ 0.005 t ≤ 50
50< t
≤ 0.53
≤ 0.57
-
-
t ≤ 75
75< t
≥ 590
≥ 570
690/820 t ≤ 16
16< t ≤ 50
20< t
≥ 17
≥ 25
≥ 17
No.5
No.5
No.4
t ≤ 32
32< t
1.5t .
20t
12 32 50 - 15
- 20
- 30
≥ 47
≥ 47
≥ 47
JFE-HITEN710M
(6 - 100)
QT ≤ 0.14 ≤ 0.35 ≤ 1.20 ≤ 0.015 ≤ 0.015 ≤ 0.40 0.30/1.30 ≤ 0.70 ≤ 0.50 ≤ 0.05 - ≤ 0.005 t ≤ 50
50< t
≤ 0.53
≤ 0.57
-
-
t ≤ 75
75< t
≥ 620
≥ 600
710/840 t ≤ 16
16< t ≤ 50
20< t
≥ 17
≥ 25
≥ 17
No.5
No.5
No.4
t ≤ 32
32< t
1.5t .
20t
12 32 50 - 15
- 20
- 30
≥ 47
≥ 47
≥ 47


JFE-HITEN780 Series and JFE-HITEN980
Designation
(Thickness mm)
Heat
Treatment
Chemical Composition (%)   Tensile Test*1) Bending Test (180° ).2) Charpy Impact Test (2mmV) *3)
Thickness
(mm)
C Si Mn P S Cu Ni Cr Mo V Nb B Ceq   PCM Yield Strength (N/mm2) Tensile
Strength
(N/mm2)
  Elongation
(%)
  Bending Radius (Test Specimen No.1) Test Temperature (℃) Absorbed Energy (J)
Thickness
(mm)
Thickness
(mm)
Thickness
(mm)
Test
Specimen
Thickness
(mm)
Thickness (mm)
JFE-HITEN780M
(6-150)
QT t≤ 100
100
≤ 0.14
≤ 0.18
≤ 0.35
≤ 0.35
≤ 1.20
≤ 1.20
≤ 0.015
≤ 0.015
≤ 0.015
≤ 0.015
≤ 0.50
≤ 0.50
0.30/1.50
0.30/1.50
≤ 0.70
≤ 0.80
≤ 0.60
≤ 0.60
≤ 0.05
≤ 0.05
-
-
≤ 0.005
≤ 0.005
t ≤ 50
50< t ≤ 100
100< t
≤ 0.53
≤ 0.57
≤ 0.62
≤ 0.30
≤ 0.32
̶
t ≤ 75
75< t
≥ 685
≥ 665
780/930 t< 16
16< t <
50 20< t
> 16
≥ 24
≥ 16
No.5
No.5
No.4
t < 32 32< t 1.5t
2.0t
12<t < 32 32<t < 50 50<t -20
- 25
- 35
≥ 47
≥ 47
≥ 47
JFE-HITEN980
(6 - 120)
OT - ≤ 0.14 ≤ 0.35 ≤ 1.20 ≤ 0.010 ≤ 0.005 ≤ 0.70 ≤ 4.00 ≤ 0.80 ≤ 0.80 ≤ 0.15 ≤ 0.02 ≤ 0.005 t ≤ 50
50< t ≤ 100
100< t
≤ 0.59
≤ 0.62
≤ 0.71
≤ 0.29
≤ 0.33
≤ 0.36
t ≤ 75
75< t ≤ 100
100< t
≥ 885
≥ 865
≥ 865
950/1130
950/1130
930/1110
t ≤ 16
16< t ≤ 50
20< t
≥ 12
≥ 19
≥ 12
No.5
No.5
No.4
t ≤ 32
32< t
2.0t
2.5t
12 - 60 ≥ 47


High Tensile Strength Steel Plates with Good Weldability
Designation
(Thickness mm)
Heat
Treatment
Chemical Composition (%)   Tensile Test*1) Bending Test (180° ).2) Charpy Impact Test (2mmV) *3)
C Si Mn P S Cu Ni Cr Mo V Nb B Ceq   PCM Yield Strength (N/mm2) Tensile
Strength
(N/mm2)
  Elongation
(%)
  Bending Radius (Test Specimen No.1) Test Temperature (℃) Absorbed Energy (J)
Thickness
(mm)
Thickness
(mm)
Thickness
(mm)
Test
Specimen
Thickness
(mm)
Thickness (mm)
JFE - HITEN570U2
(6 – 100)
QT ≤ 0.09 0.15/0.55 ≤ 1.60 ≤ 0.025 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - - - ≤ 0.20 t ≤ 16
16< t ≤ 40
40< t ≤ 75
75< t
≥ 460
≥ 450
≥ 430
≥ 420
570/700 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
12< t - 5 ≥ 47
JFE - HITEN590E
(6 – 75)
QT ≤ 0.09 0.15/0.55 1.00/1.60 ≤ 0.020 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - - - ≤ 0.20 - ≥ 450 590/710 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
6≤ t ≤ 20
20< t ≤ 32
32< t ≤ 50
50< t
5
- 5
- 10
- 20
≥ 47 **
≥ 47
≥ 47
≥ 47
JFE - HITEN610E (6 – 75) QT ≤ 0.09 0.15/0.55 1.20/1.60 ≤ 0.025 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - - - ≤ 0.20 ≥ 490 610/730 t ≤ 16
16< t ≤ 50
20< t
≥ 19
≥ 27
≥ 19
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
6≤ t ≤ 20
20< t ≤ 32
32< t ≤ 50
50< t
0
- 5
- 15
- 25
≥ 47 **
≥ 47
≥ 47
≥ 47
JFE - HITEN780EX
(6 – 60)
QT ≤ 0.09 ≤ 0.55 0.60/1.50 ≤ 0.015 ≤ 0.010 ≤ 0.50 0.30/1.50 ≤ 0.80 ≤ 0.60 ≤ 0.05 ≤ 0.03 ≤ 0.005 t ≤ 34
34< t ≤ 60
≤ 0.53 *
≤ 0.57 *
≤ 0.23
≤ 0.25
t ≤ 50
50< t ≤ 60
≥ 685
≥ 665
780/930
760/910
t ≤ 16
16< t ≤ 50
20< t
≥ 16
≥ 24
≥ 16
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
12< t ≤ 32
32< t ≤ 60
- 20
- 25
≥ 47
≥ 47


High Tensile Strength Steel Plates for High Heat-input Welding
Designation
(Thickness mm)
Heat
Treatment
Chemical Composition (%) Tensile Test*1) Bending Test (180° ).2) Charpy Impact Test (2mmV) *3)
C Si Mn P S Cu Ni Cr Mo V Nb B PCM Yield Strength (N/mm2) Tensile
Strength
(N/mm2)
  Elongation
(%)
  Bending Radius (Test Specimen No.1) Test Temperature (℃) Absorbed Energy (J)
Thickness
(mm)
Thickness
(mm)
Thickness
(mm)
Test
Specimen
Thickness
(mm)
JFE - HITEN570E (6 – 100) QT ≤ 0.09 0.15/0.55 ≤ 1.60 ≤ 0.020 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - ≤ 0.20 t ≤ 16
16< t ≤ 40
40< t ≤ 75
75< t
≥ 460
≥ 450
≥ 430
≥ 420
570/700 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
12< t - 5 ≥ 47
JFE - HITEN590E (6 – 75) QT ≤ 0.09 0.15/0.55 1.00/1.60 ≤ 0.020 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - ≤ 0.20 - ≥ 450 590/710 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
6≤ t ≤ 20
20< t ≤ 32
32< t ≤ 50
50< t
5
- 5
- 10
- 20
≥ 47**
≥ 47
≥ 47
≥ 47
JFE - HITEN610E (6 – 75) QT ≤ 0.09 0.15/0.55 1.00/1.60 ≤ 0.020 ≤ 0.010 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.30 ≤ 0.06 ≤ 0.03 - ≤ 0.20 - ≥ 490 610/730 t ≤ 16
16< t ≤ 50
20< t
≥ 19
≥ 27
≥ 19
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
6≤ t ≤ 20
20< t ≤ 32
32< t ≤ 50
50< t
0
- 5
- 15
- 25
≥ 47**
≥ 47
≥ 47
≥ 47


High Tensile Strength Steel Plates for Civil Engineering and Industrial Machinery
Designation
(Thickness mm)
Heat
Treatment
Chemical Composition (%) Tensile Test*1) Bending Test (180° ).2) Charpy Impact Test (2mmV) *3)
Thickness
(mm)
C Si Mn P S Cu Ni Cr Mo V Nb B Ceq PCM Yield Strength (N/mm2) Tensile
Strength
(N/mm2)
  Elongation
(%)
  Bending Radius (Test Specimen No.1) Test Temperature (℃) Absorbed Energy (J)
Thickness
(mm)
Thickness
(mm)
Thickness
(mm)
Test
Specimen
Thickness
(mm)
JFE - HITEN590SA (6 – 40) CR or TMCP - ≤ 0.18 ≤ 0.55 ≤ 2.00 ≤ 0.030 ≤ 0.020 Other elements are added as required. ≤ 0.45 - - ≥ 450 590/710 t ≤ 16
16< t ≤ 50
20< t
≥ 20
≥ 28
≥ 20
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
- - -
JFE - HITEN590SB (6 – 40) - ≤ 0.18 ≤ 0.55 ≤ 2.00 ≤ 0.030 ≤ 0.015 Other elements are added as required. ≤ 0.45 - 12< t - 10 ≥ 47
JFE - HITEN590SL(6 – 50) CR or TMCP - ≤ 0.16 0.20/0.55 0.80/1.60 ≤ 0.030 ≤ 0.015 - - - ≤ 0.35 ≤ 0.08 ≤ 0.05 - ≤ 0.46 ≤ 0.22 t ≤ 32 32< t ≥ 450
≥ 430
590/710
570/705
t ≤ 16
16< t ≤ 20
20< t
≥ 20
≥ 26
≥ 20
No.5
No.5
No.4
- 1.5t 6 ≤ t ≤ 36
36< t
- 40
- 20
≥ 27 **
≥ 27
JFE - HITEN690S(6 – 25) CR or TMCP - ≤ 0.15 ≤ 0.55 ≤ 2.00 ≤ 0.030 ≤ 0.015 Other elements such as Nb, V and Ti are added as required. ≤ 0.50 - - ≥ 550 690/830 t ≤ 16
16< t
≥ 17
≥ 25
No.5
No.5
- 1.5t 12< t - 10 ≥ 47
JFE - HITEN780S (5 – 160) QT t ≤ 50 ≤ 0.25 ≤ 0.55 ≤ 1.60 ≤ 0.030 ≤ 0.015 - - ≤ 0.70 ≤ 0.30 ≤ 0.10 Ti:0.005/0.02 ≤ 0.005 ≤ 0.53 - t ≤ 75
75< t ≤ 160
≥ 685
≥ 665
780/930
780/930
t ≤ 16
16< t ≤ 32
20< t
≥ 16
≥ 24
≥ 16
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
5≤ t ≤ 12
12< t ≤ 20
20< t ≤ 32
32< t ≤ 160
-
- 5
- 15
- 20
-
≥ 35
≥ 35
≥ 35
50< t ≤ 100 ≤ 0.20 ≤ 0.50 ≤ 0.50 ≤ 1.50 ≤ 0.60 Ti:0.005/0.02 ≤ 0.61
100< t ≤ 160 ≤ 0.18 ≤ 0.50 ≤ 0.50 ≤ 1.50 ≤ 0.60 Ti: ≤ 0.03 ≤ 0.70
JFE - HITEN780LE(5 – 203.2) QT or TMCP t ≤ 19
19< t ≤ 32
32< t ≤ 50
50< t ≤ 70
70< t ≤ 160
160< t ≤ 203.2
≤ 0.20 ≤ 0.40 ≤ 1.40 ≤ 0.025 ≤ 0.015 - - ≤ 0.20 ≤ 0.15 ≤ 0.08 ≤ 0.03 ≤ 0.005 ≤ 0.40* - - ≥ 685 780/930 t ≤ 16
16< t ≤ 40
20< t
≥ 16
≥ 24
≥ 16
No.5
No.5
No.4
t ≤ 32
32< t
1.5t
2.0t
5≤ t < 6
6≤ t < 12
12≤ t ≤ 160
160< t ≤ 203.2

- 40
- 40
- 40

≥ 40 ***
≥ 40
≥ 35
≤ 0.43*
≤ 0.80 ≤ 0.40 ≤ 0.53*
≤ 0.65*
≤ 0.18 ≤ 1.50 ≤ 0.80 ≤ 0.10 ≤ 0.73*
≤ 0.18 ≤ 0.55 ≤ 1.60 ≤ 0.60 ≤ 0.75 ≤ 1.50 ≤ 0.80 ≤ 0.10 Ti: ≤ 0.03 ≤ 0.78* 160< t ≤ 203.2 ≥ 610 700/850
JFE - HITEN980S(5 – 50.8) QT - ≤ 0.18 ≤ 0.35 ≤ 1.20 ≤ 0.020 ≤ 0.020 ≤ 0.70 ≤ 2.00 ≤ 0.80 ≤ 0.80 ≤ 0.08 ≤ 0.02 ≤ 0.005 ≤ 0.65 - - ≥ 885 950/1130 t ≤ 16
16< t ≤ 50.8
20< t
≥ 12
≥ 19
≥ 12
No.5
No.5
No.4
t ≤ 32
32< t
2.0t
2.5t
5≤ t ≤ 12
12< t ≤ 20
20< t ≤ 32
32< t

- 10
- 25
- 30

≥ 35
≥ 35
≥ 35
JFE - HITEN980LE (5 – 50.8) QT t ≤ 32 32< t ≤ 50.8 ≤ 0.18 ≤ 0.40 ≤ 1.40 ≤ 0.020 ≤ 0.015 - - ≤ 0.80
≤ 1.50
≤ 0.60
≤ 0.80
≤ 0.10 ≤ 0.03 ≤ 0.005 ≤ 0.58*
≤ 0.65*
- - ≥ 900 980/1150 t ≤ 16
16< t ≤ 50.8
20< t
≥ 12
≥ 19
≥ 12
No.5
No.5
No.4
t ≤ 32
32<
2.0t 2.5t 5≤ t < 6
6≤ t < 12
12≤ t < 50.8

- 40
- 40

≥ 40 ***
≥ 40
JFE – HYD960LE (5 – 63.5) QT or TMCP t ≤ 32 ≤ 0.18 ≤ 0.70 ≤ 1.70 ≤ 0.020 ≤ 0.010 - - ≤ 1.00 ≤ 0.60 ≤ 0.08 - ≤ 0.004 ≤ 0.64* - t ≤ 50.8 ≥ 960 980/1150 t ≤ 40
40< t
≥ 12 No.5
No.4
- 3.0t 5≤ t < 6
6≤ t ≤ 63.5

- 40

≥ 27****
32< t ≤ 50.8 ≤ 0.20 ≤ 0.90 ≤ 0.70*
50.8< t ≤ 63.5 50.8< t ≤ 63.5 ≥ 930 950/1120
JFE – HYD1100LE (12 – 32) TMCP - ≤ 0.20 ≤ 0.70 ≤ 1.70 ≤ 0.020 ≤ 0.010 - - — ≤ 1.00 ≤ 0.90 ≤ 0.08 - ≤ 0.004 ≤ 0.70* - - ≥ 1100 1180/1500 - ≥ 12 No.5 - 4.0t - - 40 ≥ 27


Dimensional Tolerance, Shape, and Appearance
Designation Dimensional Tolerance, Shape, and Appearance
590, 590U2, 590E 610, 610U2, 610E 690, 690M, 710, 710M 780M
980
Dimensional tolerances of thickness, width, and length, flatness, and shape are in accordance with JIS G 3115.
570U2, 570E 590S, 590SL 690S
780S, 780LE, 780EX
980S, 980LE, HYD960LE, HYD1100LE
Dimensional tolerances of thickness, width, and length, flatness, and shape are in accordance with JIS G 3193.

TYPICAL PROPERTIES OF JFE-HITEN

JFE-HITEN 610U2 ─ 590N/mm2 Class High Tensile Strength Steel Plates with good Weldability
Chemical composition
Designation Th ic
(mmkne)ss
C Si Mn P S Pcm
JFE-HITEN610U2 75 0.08 0.26 1 44 0.005 0.002 0.18
Conventional 590N/mm2g rade 50 0.13 0.26 1.29 0.011 0.003 0.23

Mechanical properties of plate
Designation Tensile test Charpy impact test
YS
(N/mm2)
TS
(N/mm2)
El*
(%)
Temp.
(t)
Dir. Absorbed energy
(J)
JFE-HITEN610U2 534 624 31* - 10 L 275
Conventional 590N/mm2g rade 566 668 50 - 10 L 269

JFE-HITEN 610E ─ 590N/mm2 Class High Tensile Strength Steel Plates for High Heat-input Welding

Chemical composition
Designation Th ic
(mmkne)ss
C Si Mn P S Pcm
JFE-HITEN610E 25 0.08 0.20 1.33 0.008 0.003 0.17
Mechanical properties of electro-gas arc welded joint
Welding condition Tensile strength
of welded joint
(N/mm2)
Charpy impact test
Groove configuration Welding material Heat input
(kJ/mm)
Test location Test temp.
(°C)
Absorbed energy
(J)
DWS–1LG 120 617
618
Weld metal 0 113
- 25 82
Fusion line 0 244
- 25 171
Center of HAZ 0 271
- 25 171

JFE-HITEN 780EX ─ 780N/mm2 Class High Tensile Strength Steel Plates with High Weldability

Chemical composition
Designation Thickness (mm) C Si Mn P S Pcm
JFE-HITEN780EX 34 0.08 0.20 1.05 0.004 0.001 0.22

Mechanical properties of plate
Tensile test Charpy impact test
YS TS El* Temp. Dir. Absorbed energy
(N/mm2) (N/mm2) (%) (°C)   (J)
769 844 24 - 40 L 286

JFE-HITEN 980 ─ 980N/mm2 Class High Tensile Strength Steel Plates with High Weldability

Chemical composition
Thickness (mm) C Si Mn P S Pcm
75 0.09 0.25 1.14 0.005 0.001 0.27

Mechanical properties of plate
Tensile test(1/4 t) Charpy impact test(1/4 t)
YS TS El* Temp. Dir. Absorbed energy
(N/mm2) (N/mm2) (%) (°C)   (J)
930 977 25 0 C 208
- 60 C 158
Mechanical properties of submerged arc welded joint
Welding condition Tensile strength
of welded joint
(N/mm2)
Charpy impact test
Groove configuration Welding material Heat input
(kJ/mm)
Test location Test temp.
(t)
Absorbed energy
(J)
PFH-100J/US
-100J
45 977
981
Weld metal - 10 109
Fusion line 136
Center of HAZ 248
WANT TO KNOW MORE?
or call
0982 0944 724


We Supply JFE 780 LE Plates in listed cities in India
Mumbai, Lucknow, Coimbatore, Imphal, Mysore, Ratlam, Delhi, Kanpur, Darjeeling, Jalandhar, Nagpur, Solapur, Kolkata, Allahabad, Dehradun, Jammu, Nashik, Srinagar, Chennai, Ahmedabad, Faridabad, Jamshedpur, Bhadravati, Chattisgarh, Durgapur, Asansol, Hospet, Bellary, Visakhapatnam, Nellore, Surat, Bangalore, Chandigarh, Ghaziabad, Jhansi, Patna, Siliguri, Hyderabad, Stainless Steel Pipe dealers in Salem, Amritsar, Noida, Kochi (Cochin), Mangalore, Indore, Vadodra, Bhubaneswar, Bikaner, Bhavnagar, Tirupur, Ankleshwar, Warangal, Agartala, Thoothukudi, Stainless Steel Pipe suppliers in Pune, We offer fastest delivery in India including Thiruvanthapuram, Jaipur, Aizawl, Guwahati, Kozhikode, Raipur, Vishakhapatnam, Jabalpur, Bhopal, Gwalior, Ludhiana, Rajahmundry, Thane, Agra, Bhubaneshwar, Gurgaon, Madurai, Rajkot, Varanasi, Bhilai, Haridwar, Meerut, Ranchi, Ahmednagar, Akola, Amravati, Aurangabad, Baramati, Beed, Bhandara, Bhiwandi, Buldhana, Chandrapur, Chimur, Dahanu, Dhule, Dindori, Erandol, Gadchiroli, Hatkanangle, Hingoli, Ichalkaranji, Jalgaon, Jalna, Karad, Khed, Yavatmal, Kolaba, Kolhapur, Kopargaon, Latur, Malegaon, Mumbai, Nagpur, Nanded, Nandurbar, Nashik, Osmanabad, Pandharpur, Parbhani, Rajapur, Ramtek, Ratnagiri, Raver, Sangli, Satara, Shirdi, Shirur, Solapur, Thane, Wardha, Washim, Andhra Pradesh, Jammu and Kashmir, Nagaland, Uttarakhand, Haryana, Lakshadweep, Arunachal Pradesh, Jharkhand, Odisha, West Bengal, Himachal Pradesh, Assam, Karnataka, Punjab, Andaman and Nicobar Islands, Puducherry, Bihar, Kerala, Rajasthan, Chandigarh, Meghalaya, Chhattisgarh, Madhya Pradesh, Sikkim, Dadar and Nagar Haveli, Mizoram, Goa, Maharashtra, Tamil Nadu, Daman and Diu, Tripura, Gujarat, Manipur, Telangana, Delhi, Uttar Pradesh in India.

We Supply and Export in listed Country
United States of America, Malaysia, UAE, Indonesia, Saudi Arabia, Iran, Qatar, India, China, United Kingdom, Singapore, Canada, Thailand, South Korea, Turkey, Philippines, Egypt, Germany, Italy, Japan, Russia, Vietnam, Australia, South Africa, Portugal, Morocco, Costa Rica, Kazakhstan, Netherlands, Mexico, Brazil, France, Spain, Taiwan, Nigeria, Bangladesh, Kuwait, Iraq, Ukraine, Poland, Jordan, Romania, Oman, Hong Kong, Venezuela, Colombia, Norway, Chile, Trinidad & Tobago, Greece, Czechia, Belgium, Sri Lanka, Cyprus, Angola, Myanmar (Burma), United Kingdom, Canada, South Korea, Thailand, Netherlands, Spain, Turkey, Australia, Mexico, Pakistan, Vietnam, Brazil, Philippines, France, Taiwan, Poland, South Africa, Russia, Nigeria, Kuwait, Czechia, Norway, Romania, Egypt, Oman, Sweden, Belgium, Hong Kong, Israel, Colombia, Switzerland, Denmark, Finland, Argentina, Venezuela, Peru, Ukraine, Chile, Bangladesh, Portugal, Ireland, Austria, Algeria, Greece, Iraq, New Zealand, Slovakia, Hungary, Kazakhstan, Slovenia, Lithuania, Serbia, Sri Lanka, Bahrain, Bulgaria, Morocco, Tunisia, Croatia, Jordan, Ecuador, Trinidad & Tobago, Estonia, Azerbaijan, Ghana, Lebanon, Cyprus, Dominican Republic, Latvia, Libya, Costa Rica, Cambodia, Macedonia (FYROM), Belarus, Jamaica, Palestine, Turkmenistan